OAR LOCK / CLEAT FOR INFLATABLE BOATS.THE SHAPE OF THE HANDLE ALLOWS YOU TO TIE A ROPE ON IT.
INFLATABLE boat HANDLE /CLEAT COLOR :GRAY
Can be used as a replacement for existing oar locks or can be used to add new oar locks to inflatable dinghy.
Package included :1PC INFLATABLE BOAT OAR LOCK PATCH BLACK.
Easy to glue on.
Short application instruction:
Deflate boat and make sure humidity is low before proceeding to glue application.
Outline place where you going to glue oarlocks first with a pen and then with a painters tape.
Wipe clean both areas to be glued with 100% acetone, wait 5 minutes before applications.
Apply 3 thin layers of boat PVC glue from a repair kit with an old toothbrush on both surfaces to be glued. Wait 5 minutes between first 2 applications, and 10 minutes after last 3rd application.
After 10 minutes since last application of glue has passed, joint pieces together and use spoon to press out any air bubbles. Wipe out excess glue with an acetone.
Leave for 24 hours for glue to cure completely.