Welcome to Aquamarine  inflatable boats rafts,dinghy
  

Care and maintenance

  

How to repair broken oar lock on an inflatable boat

This article provides solution for broken PVC oar lock on inflatable boat. In a few short and easy steps you will have your oar lock repaired .
Remove 2 Phillips screws Remove 2 screws holding oarlock Unplug shaft compartment unplug shaft compartment Remove PVC shaft – Please measure diameter of the shaft . New reinforced oarlock inner diameter 18.25 mm and will not fit 19.25 mm shafts. If shaft diameter of your oar lock 19.25 mm you will have to use sand paper and remove layers of shaft PVC material . remove PVC shaft from oar lock Install new oar holder. Insert Shaft.
Plug shaft compartment.
Screw Phillips screws back .

 
Copyright Aquamarineboat.com